manualshive.com logo in svg

NEC VERSA P, Service Manual

Share
Download
NEC VERSA P Service Manual Download Page 53

2-14     Setup and Operation

n

 

BackLight

  

Sets the LCD backlight to standard or full.

n

 

HighLight

  

Sets the character brightness to standard or full.

n

 

System Sound Power 

 

Allows you to turn off the speaker amplifier to save

system power.

n

 

PCMCIA Power

  

Allows you to turn off the power to the PCMCIA slots.

n

 

Suspend Warning Tone

  

Enables or disables a warning tone signaling Sus-

pend/Resume. It is strongly recommended to keep this option enabled.

 

NOTE:

  The suspend warning tone is disabled if

System Sound Power is set to disabled.

n

 

Power Management under AC

  

Allows the use of power management features

when AC power is connected.

n

 

Resume on Serial Port Ring

  

System automatically powers on when data is re-

ceived via a serial port modem.

n

 

Resume on Time of Day

  

Enables the user to specify a time of day to automati-

cally power on.

System

Use this menu to add to the system's overall performance.

n

 

Quick Boot

  

Reduces boot time by deleting unnecessary power-on self-tests.

n

 

Setup Lock

  

Disables Auto Setup to prevent unauthorized users from viewing

or changing system parameters at power-on.

Time/Date

Sets the current time and date in military format. To set the time, enter the hour, minute,
and seconds in hh:mm:ss, 24-hour format. For example, type 

14:30:00

 for 2:30 p.m. Enter

the current day, month, and year for example, mm/dd/yyyy. For example, to enter October
7, 1994, type 

10/07/1994

.

Remember to type any preceding zeroes. For example, to enter 7:20 a.m., type 

07:20:00

.

Summary of Contents for VERSA P


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands