109
4.
VD 0 is created in DG 0 as shown in the screen below:
5.
After making sure that the VD is created correctly, click [Accept] at the lower right of the screen.
6.
The confirmation message "Save this Configuration?" appears. Click "Yes" to save the
configuration.
7.
The confirmation message "All data on the new Virtual Disks will be lost. Want to Initialize?"
appears. Check the target HDD
‟s and select "Yes."
8.
The "Virtual Disks" operation screen is displayed. If no other operation is required, click [Home] at
the lower left of the screen.
Summary of Contents for N8403-019
