NEC N8403-019, (Japanese) User Manual

Page: 114 / 146

94
Default settings and their descriptions:
Item Default Description Change
Battery Backup Present
[None] Displays the properties of the backup battery.
The disk array controller does not support the battery
backup feature.
–
Set Factory Defaults [No]
Yes Restores factory defaults. Permitted
Cluster Mode Disabled
–
Prohibited
Rebuild Rate 30 Recommended value: 30 Permitted
Patrol Read Rate 30 Recommended value: 30 Permitted
BGI Rate 30 Recommended value: 30 Permitted
CC Rate 30 Recommended value: 30 Permitted
Reconstruction Rate 30 Recommended value: 30 Permitted
Adapter BIOS [Enabled]
Disabled
–
Prohibited
Coercion Mode [None]
128MB-way
1GB-way
–
Prohibited
PDF Interval 300
–
Prohibited
Alarm Control [Disabled]
Enabled
Silence Disabled: Does not issue an alarm.
Enabled: Issues an alarm.
Silence: Disables an alarm. Permitted
Cache Flush
Interval 4
–
Prohibited
Spinup Drive Count 2
–
Prohibited
Spinup Delay 6
–
Prohibited
Stop On Error [Disabled]
Enabled
–
Prohibited
[ ]: Factory-set value
How to change setting value
In the [Adapter Properties] screen, change a parameter to the desired value, and then click [Submit] in the
center of the screen to set the new value.