viii
<設置・移動・保管・接続に関する注意事項>
Installation, Relocation, Storage, and Connection
CAUTION
プラグを差し込んだままインタフェースケーブルの取り付けや取り外しをしない
Do not connect any interface cable with the power cord of the server plugged
into a power source.
インタフェースケーブルの取り付け/取り外しは本体装置の電源コードをコンセン
トから抜いて行ってください。たとえ電源を
OFF
にしても電源コードを接続したま
まケーブルやコネクタに触ると感電したり、ショートによる火災を起こしたりする
ことがあります。
Make sure to power off the server and unplug the power cord from a power outlet
before connecting/disconnecting any interface cable to/from the server. If the
server is off-powered but its power cord is plugged into a power source, touching a
cable or connector may cause an electric shock or a fire due to a short circuit.
指定以外のインタフェースケーブルを使用しない
Do not use an unauthorized interface cable.
インタフェースケーブルは、
NEC
が指定するものを使用し、接続する装置やコネク
タを確認した上で接続してください。指定以外のケーブルを使用したり、接続先を
誤ったりすると、ショートにより火災を起こすことがあります。
また、インタフェースケーブルの取り扱いや接続について次の注意をお守りくださ
い。
ケーブルを踏まない。
ケーブルの上にものを載せない。
ケーブルの接続がゆるんだまま使用しない。
破損したケーブルを使用しない。
破損したケーブルコネクタを使用しない。
ネジ止めなどのロックを確実に行ってください。
Use only interface cables authorized by NEC and locate a proper device and
connector before connecting a cable. Using an unauthorized cable or connecting a
cable to an improper destination may cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface cable:
Do not step on the cable.
Do not place any object on the cable.
Do not use the server with loose cable connections.
Do not use any damaged cable connector.
Make sure the cable is securely locked with a screw.
Summary of Contents for N8403-019
