88
1-1 Supported Functions
Read the following sections describing supported functions and precautions before using WebBIOS:
Indication of model name and capacity of HDD
Indication of HDD allocation status
Creation of virtual disk
Setting of RAID level
Setting of Stripe Block size
Setting of Read Policy/Write Policy/IO Policy
Indication of configuration information and status of virtual disk
Removal of virtual disk
Clearing of configuration
Execution of initialization
Execution of Consistency Check
Execution of manual rebuild
Execution of reconstruction
1-2 Notes on Creating Virtual Drive
1.
The HDD
‟s configuring a disk group should have the same capacity and rotation speed.
2.
Be sure to execute Consistency Check after creating a virtual disk.
3.
When installing an OS in a virtual disk under the disk array controller, create a virtual disk dedicated
to the OS installation.
4.
The mouse is disabled on some servers. In this case, use the keyboard
TAB
key to move the cursor
and the
Enter
key to select. To select disks or disk groups in the Configuration Wizard, select them by
using the up and down cursor keys while pressing the Shift key.
5.
WebBIOS does not work with the remote console feature of NEC DianaScope.
Summary of Contents for N8403-019
