A-2 Specifications
Express5800/R120b-2
Diskless model
Item
N8100-
1644
N8100-
1645
N8100-
1646
N8100-
1647
N8100-
1648
N8100-
1649
Serial
1 port (RS-232C compliant/D-Sub 9-pin, serial port B, 1 for rear panel,
optional port can be used (up to two ports in total))
USB 2.0
8 ports (2 for front panel, 2 for rear panel, 4 for internal)
1000BASE-T LAN
connector
2 ports (100Base-TX/10Base-T supported, RJ-45, 2 for rear panel)
LAN connrctor for
management
1 port (100Base-TX/10Base-T supported, RJ-45, 1 for rear panel)
Backup power supply
Supported (option, hot-plug available)
Backup fan
Supported (option, hot-plug available)
Excluding front bezel,
inner rail, and
protruding parts
445.2 (width) x 721.2 (depth) x 86.7 (height)
External
dimensions
(mm)
Including front bezel,
inner rail, and
protruding parts
486.5 (width) x 821.9 (depth) x 88.6 (height)
Weight (Max.)
21kg (31kg) (including rail)
Power supply
750W 80 PLUS
®
Gold compliant (hot-plug available)
AC 100V ± 10% or AC 200V ± 10%, 50/60Hz ± 3Hz
Power consumption (100V max. at
configuration, in standby)
270VA/
268W
276VA/
274W
296VA/
294W
283VA/
281W
286VA/
284W
297VA/
295W
Power consumption (100V max. at
configuration, with high load)
580VA/
570W
600VA/
590W
620VA/
610W
580VA/
570W
670VA/
660W
790VA/
780W
Temperature
10 to 35ºC (operating), -10 to 55ºC (non-operating, storage)
Environmental
requirements
Humidity
20 to 80% RH (no condensation)
*6
*1 In a 2-CPU configuration. Max. 96GB (16GB x 6) in a 1-CPU configuration.
*2 When using the memory RAS feature, you need to install a dedicated RAS memory board
(N8102-387/388/389/390/391). Note that the memory boards N8102-371/372/373/374/375 cannot be used.
*3 The hard disk drive capacity is indicated based on the conversion value of 1GB = 1000
3
bytes. If you are
calculating the hard disk drive capacity based on a conversion value of 1GB = 1024
3
bytes, the actual usable
hard disk drive capacity will be insufficient.
*4 Writing software is not supplied with the server.
*5 For maintenance purposes or for re-installing operating system, prepare at least one external DVD-ROM and
one external FDD or Flash FDD per system.
*6 If the server is stored in an environment where the temperature is either too low or too high, the system clock
might become inaccurate.
If you require an accurate system clock, we recommend using a time server (NTP server).
Summary of Contents for N8100-1644F
