NEC N8100-1644F, User Manual

Page: 62 / 547

2-28 General Description
Notes on handling the Flash FDD
„
Do not turn off the server while the access LED of the Flash FDD is blinking.
Turning off the server at this time can cause a failure or data corruption.
„ The Flash FDD is a consumable.
→
If the Flash FDD causes an error, use a new Flash FDD.
„
The Flash FDD cannot be connected by way of a USB hub.
Directly connect the Flash FDD to a USB connector of the server.
„ Before touching the Flash FDD, discharge static electricity from your body by touching a
nearby metal object (such as a doorknob or aluminum frame).
„ Do not disassemble the Flash FDD.
„ Do not apply a strong force to the Flash FDD.
„
Do not place the Flash FDD in an area directly exposed to sunlight or near a heater.
„ Do not handle the Flash FDD while eating, drinking, or smoking. Also, be careful not to
get thinner, alcohol, or other corrosive substances on the Flash FDD.
„
Be careful when connecting the Flash FDD to the server.
„ Do not move the server or Flash FDD while the Flash FDD is inserted into a server USB
connector. Doing so might cause a Flash FDD failure.
„ After using the Flash FDD, disconnect it from the server.