Installing and Using Utilities 6-7
PARAMETER FILE CREATOR
"Parameter File Creator" is a tool to create [Parameter file] that is used for configuring the server
with the Express Setup (see Chapter 5 for details).
If you use the Parameter file created by the Express Setup and Parameter File Creator to operate the
setup, you can setup from the installation of OS to several utilities automatically except for a few
key input to confirm the specification. Also, you can install the system with the same specification
as before when re-installing the system. We recommend you to create [Parameter file] to setup the
servers from NEC EXPRESSBUILDER.
When using a floppy disk, a USB floppy disk drive is required.
IMPORTANT:
You cannot create [Parameter file] for Microsoft Windows Server
2003 x64 Editions.
The setup using a parameter file saved in the Flash FDD is not
supported.
NOTE:
You can install Windows Server 2008 R2/Windows Server
2008/Windows Server 2003 without [Parameter file].
Also, you can modify/newly create [Parameter file] during the setup
with NEC EXPRESSBUILDER.
Summary of Contents for N8100-1644F
