NEC N8100-1644F, User Manual, Page: 101 / 547

Configuring Your Server 4-15
Advanced Chipset Configuration submenu
When [Advanced Chipset Configuration] is selected in the Advanced menu and then the Enter key
is pressed, the screen below is displayed.
For details about the options, see the following table.
Option Parameters Description
HPET Disabled
[Enabled]
Specify whether to enable or disable the multimedia timer.
VT-d Disabled
[Enabled]
Specify whether to enable or disable Intel
®
Virtualization
Technology for Directed I/O, which is provided by the Intel
chipset. This setting is only displayed for a processor that
supports this feature.
I/OAT Disabled
[Enabled]
Specify whether to enable or disable the Intel I/O acceleration
technology feature.
QPI Frequency [Auto]
4,800 GT/s
5,866 GT/s
6,400 GT/s Specify the QPI bus speed.
Wake On
LAN/PME Disabled
[Enabled] Specify whether to enable or disable the feature for remotely
turning the power on through a network.
Wake On Ring [Disabled]
Enabled Specify whether to enable or disable the feature for remotely
turning the power on through a serial port (modem).
Wake On RTC
Alarm [Disabled]
Enabled Specify whether to enable or disable the feature for remotely
turning the power on by using the real-time clock alarm feature.
[ ]: Factory-set
IMPORTANT:
If the AC power is turned off while the Wake On Ring
feature is enabled, this feature is disabled at the next system boot after
AC power-on. Press the power switch to start up the system. If the AC
power is turned off, the Wake On Ring feature on the power
management chip is disabled until the next DC power-on.