NEC N8100-1223F, User Manual

Page: 80 / 482

3-4 Setting Up Your Server
Do not place the server in the following places. Placing the server in such places may cause
malfunctions of the server.
„
Places with drastic changes in temperature (e.g., near a heater, air conditioner, or
refrigerator)
„
Places with strong vibration
„
Places where corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine,
ammonia, ozone, etc) exist.
And also, places where the air (or dust) includes components accelerating corrosion (ex.
sulfur, sodium chloride) or conductive metals.
„
On a non-anti-static carpet
„
Places with possibilities of falling objects
„
Places near a device generating intense magnetic field (such as a TV, radio,
broadcast/communication antenna, power transmission wire, and electromagnetic crane) is
placed (If unavoidable, contact your service representative to request proper shield
construction.)
„
Places where a power outlet that shares the ground line with another (especially the one to
which a device with large power consumption is connected) must be used for the server
„
Places near equipment that generates power noise (e.g., contact spark at power-on/power
off of commercial power supply through a relay). If you must install the server close to
such equipment, request your service representative for separate power cabling or noise
filter installation.