NEC N8100-1223F, User Manual

Page: 73 / 482

General Description 2-37
3.
Hold the tray lightly and pull it out toward you until the tray stops.
4.
Put the CD/DVD-ROM on the tray carefully and securely with the date recorded surface
facing toward the tray.
5.
As shown in the figure below, hold the tray with a hand and press the CD/DVD-ROM
with fingers of another hand to make the hole of the CD/DVD-ROM fit to the rotor at the
center of the tray.
6.
Push the front of the tray lightly to retract it into the drive.
IMPORTANT: If a noisy sound in driving the DVD-ROM drive occurs
after setting a CD/DVD-ROM, set it again correctly.
Rotor
Press this part of
CD/DVD-ROM.