NEC mPD780852 Series, Preliminary User'S Manual

Page: 55 / 315

55
CHAPTER 3 CPU ARCHITECTURE
Preliminary User’s Manual U14581EJ3V0UM00
3.2 Processor Registers
The
µ
PD780852 Subseries incorporate the following processor registers.
3.2.1 Control registers
The control registers control the program sequence, status, and stack memory. The control registers consist of
a program counter (PC), a program status word (PSW), and a stack pointer (SP).
(1) Program counter (PC)
The program counter is a 16-bit register which holds the address information of the next program to be executed.
In normal operation, the PC is automatically incremented according to the number of bytes of the instruction to
be fetched. When a branch instruction is executed, immediate data and register contents are set.
RESET input sets the reset vector table values at addresses 0000H and 0001H to the program counter.
Figure 3-7. Program Counter Configuration
PC
15 0
PC15 PC14 PC13 PC12 PC11 PC10 PC9 PC8 PC7 PC6 PC5 PC4 PC3 PC2 PC1 PC0
(2) Program status word (PSW)
The program status word is an 8-bit register consisting of various flags to be set/reset by instruction execution.
Program status word contents are automatically stacked upon interrupt request generation or PUSH PSW
instruction execution and are automatically reset upon execution of the RETB, RETI, and POP PSW instructions.
RESET input sets PSW to 02H.
Figure 3-8. Program Status Word Configuration
7 0
IE Z RBS1 AC RBS0 0 ISP CY PSW