56
R/C
r
G/Y
B/C
b
V
H/H
V
R
AC
TIV
E
L/M
ON
O
Projector recognizes
MMS 1000.
Power On/Off
Signal switching
Output formatting
Power On/Off
Signal switching
Output formatting
Other controls
MMS 1000 does not
recognize Projector.
(Independent operation)
10. Link Mode with MMS1000
When networked with the MMS 1000 (Multi-Media Switcher), your DLP Cinema Projector simplifies the con-
trol of MMS 1000. (Control of your projector from MMS 1000 is not possible.)
10-1. Connecting MMS 1000 to Your Projector
Controlled Items:
• Power On/Off
• Signal switching
• Output formatting
Note:
Keep the Firmware Data entries on both MMS 1000 and your projector always last updated while you are interfac-
ing the two with each other.
While interfaced with your projector, MMS 1000 recognizes the commands from the projector as those normally received
from external sources, and not specifically from your projector. Your projector alone operates in the interface mode.
Installation
Connect your projector to MMS 1000.
Video Signals
Connect your projector with MMS 1000 using a DVI-D cable:
Model iS10 Projector
Connect the DVI-D main output terminal of the MMS 1000 to the DVI input terminal of your projector using a DVI-D
cable.
Model iS8-2K Projector
Using DVI-D cables, connect the DVI-D main and sub output terminals of the MMS 1000 to the DVI-A and DVI-B input
terminals of your projector, respectively.
