53
>Setting Example
Conditions:
Project the screen size in Vista (Aspect ratio is
1:1.85)
Input signal format: HD-SDI 1920 x 1080 @24 psF
Squeeze signals
(Signals that have been compressed at the control side 1920 to 1280 in
the horizontal direction and 1080 to 1024 in the vertical direction)
Aspect Ratio: 1.85
Input Size: 1280 x 1024
For signals other than squeeze signals
6. Click [Setting] of [CSC File].
The [CSC File Setup] screen will appear.
Click Import and select a color space file that corresponds to the
input signal.
Press [Exit] when the setting has been completed.
(The required CSC file is already contained in the projector and be
cause of this there is no need to enter a numerical value.)
7. Click [Import] of [TCGD File].
Click Import and select the TCGD file.
Press [Exit] when the setting has been completed.
In the theater, P7V2 Theater is normally used.
Note:
Use P7V2 telecine for post production and contents creation.
8. Click [Import] of [LUT-AL File].
Click Import and select the LUT-AL file.
Normally, you do not need to make a selection.
9. Click [Import] of [LUT-CLUT File].
Normally, you do not need to make a selection.
10.Click [Setting] of [LUT-DG File].
The [LUT-DG File Setup] screen will appear.
Normally, click File Select and select the file described below.
Press [Exit] when the setting has been completed.
Movies
"Gamma 2.6.LUT-DG" (equivalent to "Mk7 PL2.6.LUT-DG)
PC and Other Input
"Graphics_Enhanced.LUT-DG"
When using Parametric
Check [Parametric], enter the gamma value, and click [OK].
11.Click [Save], enter the file name that is to be saved,
and click [OK].
DVI Connector
RGB input
: "Unity RGB.CSC" (Same as "Mk7 Unity RGB.CSC")
HDSDI Connector
Component input
: "YCbCr 240M.CSC (Same as "Mk7 YCbCr 240M.CSC")
"YCbCr 709.CSC (Same as "Mk7 YCbCr 709.CSC")
DUAL LINK RGB input : "RGB 10-bit 64-940.CSC"
Aspect Ratio: 1.85
Input Size: 1920 x 1080
