19
1
2
3
4
4
5
3-3. Mounting the Primary Lens
Example: Mounting DLP-CINEMA lenses
햲
Remove the rubber cap that covers the pri-
mary lens setscrew located on the side
panel of the projector. Use a slotted screw-
driver to untighten the setscrew.
햳
Loosen the screws on both sides of the lens
hood to remove the hood pieces sideways.
햴
Holding the primary lens unit with its guide
notch up, insert it into the projector until it
cannot go further.
햵
While slightly pushing the lens unit up, re-
tighten the lens setscrew previously loos-
ened.
햶
Replace the setscrew rubber cap to its
place.
