NEC Inaset R2, User Manual

Page: 41 / 119

3-2 INASET R2 Setup
INASET R2 User Guide - Revision 1
Figure 3-1 INASET R2 Main Menu window
Entering Text Using the Dial Keys
The dial keys (0-9, *) are used to enter both text and numbers in the
various INASET R2 display windows. This is required when configuring
the INASET R2 from the Setup menu.
Each dial key can be pressed one or more times to enter the characters
marked on the key. The following example shows the key sequence used
to enter text.
Example:
To enter the text Smith :
Step 1
Press 7 four times, then press the cursor right.
Step 2
Press 6 once, then press cursor right.
Step 3
Press 4 three times, then press cursor right.
Step 4
Press 8 once, then press cursor right.
Step 5
Press 4 two times, then press cursor right.
2:45 PM THU 28 FEB 2003
CAUTION
Only make changes to the INASET R2 options described in this manual. Changing
other options and settings not described in this manual could cause INASET R2 to
not operate. Should you encounter any problems changing options, contact your
phone system administrator.