NEC Inaset R2, User Manual

Page: 21 / 119

2-4 Features
INASET R2 User Guide - Revision 1
Phone Login
INASET R2 has a login feature that allows the phone to be locked by
login number and password to avoid unauthorized use. This login can be
configured as automatic or manual by your phone system administrator.
If your INASET R2 has been configured for manual login, then you must
manually login before it can be used. (See your phone system
administrator for your login and password numbers.)
When manual login is required, the INASET R2 Login window displays
when INASET R2 is first started ( Figure 2-2 ).
Figure 2-2 INASET R2 Login window
Manual Login
Follow these steps to login to your INASET R2 phone:
Step 1
Enter your login number using the Dialing keys (0-9, *, #). When your
number is entered, press the function key for
Set on the display. (If you
make an incorrect entry, press the function key for Cancel to clear your
entry and then re-enter your number.)
Step 2
Now enter your password number using the Dialing keys (0-9, *, #).
When your number is entered, press the function key for
OK on the
display. (If you make an incorrect entry, press the function key for Cancel
to clear your entry and then re-enter your number.)
Step 3
If login was successful, the time and date will display at the top of the
Home application window. The INASET R2 phone is now ready to use.
NOTE
In automatic login mode, the INASET R2 Login window will not display. The phone
system will automatically login your INASET R2 phone for you. No additional login is
required by you.