NEC Inaset R2, User Manual

Page: 24 / 119

Features 2-7
INASET R2 User Guide - Revision 1
Making a Call
Internal Call
• Lift handset, hear dial tone.
• Dial desired extension number. (Display shows dialed
number.)
• Listen for called party to answer and begin
conversation.
External Call
• Lift handset, hear dial tone.
• Dial the outside-line access code, (e.g. 9).
• Dial desired number. (Display shows dialed number.)
• Listen for called party to answer and begin
conversation.
Hands Free (Speakerphone mode)
• Press the Speaker key, hear dial tone.
• Dial desired number.
• Listen for called party to answer, press the
Mic key
(Mic key light ON) and begin conversation.
Putting a Call on HOLD
Temporarily place the current active call on hold.
• Indicate to the party on the line that you will be
placing them on hold.
• Press the Hold key. (Display shows caller on Hold.)
To Retrieve a Call on Hold
• Lift handset or press the Speaker key.
• Press the line key (or press More as needed) for the
line on hold.
If Unanswered
After a pre-programmed time with a call on hold,
Automatic Recall is initiated (if enabled). A visual and
audible signal (line key flash and ring burst) is sent to the
station that placed the call on hold.
Outside Access Code ________________________
l