NEC Inaset R2 User Manual Download Page 37

Page: 37 / 119

2-20 Features

INASET R2 User Guide - Revision 1

Intercom

INASET R2 and the PBX system can provide a station to

station intercom function. Three intercom modes are

possible, depending on the phone system configuration.

Automatic Intercom

To initiate an Automatic intercom call:

• Lift handset or press the

Speaker

key.

• Press the function key for

AICM

. Hear ringback tone.

To answer an Automatic intercom call:

• Press the function key for

AICM

• Lift handset, start conversation.

Manual Intercom

To initiate a Manual intercom call:

• Press the function key for

MICM

• Lift handset, hear ringback tone.
• Press the function key for

SIG

(for called station to

receive ringing).

To answer a Manual intercom call:

• Press the function key for

MICM

• Lift handset, start conversation.

NOTE

Contact your phone system administrator to determine if your INASET R2 has this
function configured.

Summary of Contents for Inaset R2
























































































































Search results

Summary of Contents for Inaset R2

Reviews:

Related manuals for Inaset R2

Brands by name

Popular brands

NEC Inaset R2, User Manual

Search results

Summary of Contents for Inaset R2

Reviews:

Related manuals for Inaset R2

Brands by name

Popular brands