1. System BIOS
Express5800/B120g-h Maintenance Guide
81
Chapter 2 Useful Features
Option Parameter
Description
to start the OS. During this process, POST is suspended until
user interruption occurs.
BMC IRQ
[Disabled]
IRQ 11
Specifies whether to allocate interrupt lines for BMC.
Post Error Pause
Disabled
[Enabled]
Enables or disables the feature to suppress OS boot process
until user interruption occurs when POST detects an error. If this
option is set to [Disabled], the system attempts to start the OS
without waiting for user interruption, even if POST detects an
error.
Memory Error
Halt
[Boot]
Enables or disables the feature to suppress OS boot process
until user interruption occurs when POST detects degradation
error occurred on memory resources. This feature is enabled if
POST Error Pause is set to
Enabled
.
Even if this option is set to
Boot
, operation stops at the end of
POST if errors occurred for all resources.
Power Switch Inhibit
[Disabled]
Enabled
Enables or disables the power switch inhibit feature.
CLI SETUP
[Disabled]
Enabled
Enables or disables the Command Line Interface SETUP
feature. When this option is set to
Enabled
, the operation of
SETUP is changed to use Command Line Interface (CLI). To
switch back to the menu operation, set this option to
Disabled
.
For details of the command, run HELP command after prompt of
CLI SETUP is displayed.
If the number of bootable devices exceeds a certain number, a
message "Failed to get Boot Variable data" is displayed on the
command line, and you are unable to open or change the
Boot
menu. Reduce the number of bootable devices by
disconnecting unused USB device, or change
Option ROM
Scan
for onboard devices or PCI slots to
Disabled
.
[ ]: Factory setting
