NEC Express5800/140Rf-4 User Manual Download

Page: 432 / 461

Installing Windows Server 2003 x64 Editions D-19

Graphics Accelerator Driver

The standard graphics accelerator driver installed by "Update NEC Express5800 system" is
automatically installed.

The following is the procedure when it is necessary to install manually.

If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.

Insert the NEC EXPRESSBUILDER DVD into the DVD-ROM drive.

Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].

Run "Setup.exe" in the following directory.

\001\win\winnt\w2k3amd\video\setup.exe.

Follow the message to continue the installation.

If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.

Remove the NEC EXPRESSBUILDER DVD from the DVD-ROM drive, follow the
direction on the screen and restart the system.

Installing Disk Array Controller Driver
(N8103-90)

The Disk Array Controller driver will be installed automatically.

Installing SAS Controller Driver
(N8103-104)

If you utilize SAS controller driver (N8103-104), update your system with NEC
EXPRESSBUILDER DVD attached to your system.

The SAS controller driver will be installed automatically.

Summary of Contents for Express5800/140Rf-4














































































































































































































































































































































































































































































Search results

Summary of Contents for Express5800/140Rf-4

Reviews:

Related manuals for Express5800/140Rf-4

Brands by name

Popular brands

NEC Express5800/140Rf-4, User Manual

Search results

Summary of Contents for Express5800/140Rf-4

Reviews:

Related manuals for Express5800/140Rf-4

Brands by name

Popular brands