manualshive.com logo in svg

NEC Express5800/140Rf-4, User Manual

Share
Download
NEC Express5800/140Rf-4 User Manual Download Page 339

9-6  Upgrading Your Server 

In the RAID System configuration, use the same model of hard disk drives. 

A dummy tray is installed in the 2.5-inch disk bay. The purpose of a dummy tray is to increase the 
cooling effect in the server. Install a dummy tray in slots not containing a hard disk drive. 

IMPORTANT: 

Use the appropriate dummy tray for this server. 

 

Installation 

Take the following steps to install a hard disk drive. This procedure applies to all the slots. 

NOTE: 

Any hard disk drive can be installed or removed in or from the 

server only by removing the front bezel without pulling out the server 
from the rack. In RAID System configuration (except for RAID0), the 
hard disk drive can be installed or removed while the server is being 
powered. 

 

IMPORTANT: 

In the RAID System configuration, use the same model 

of hard disk drives. 

 

1. 

See the section "Preparing for Installation and Removal" described earlier to prepare 
(except for RAID System configuration). 

2. 

Unlock the front bezel with the security key, and remove the front bezel. 

3. 

Locate the slot in which you are going to install a hard disk drive. 

The server has eight slots. 

4. 

Remove the dummy tray. 

IMPORTANT:

 Keep the dummy tray for future use. 

 

Summary of Contents for Express5800/140Rf-4














































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands