NEC ElectraElite IPK, Programming Manual

Page: 71 / 803

1 - 38 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
09 Telephone to Tenant Assignment 00 (All Tenant
Telephones) Tenant Number
10 Station Number Assignment 100 Refer to 4-10 Station Number
Assignment on page 2-513 .
11 Ringing Line Preference Selection YS NO, YS
12 Line Key Selection for Telephone
Mode CO Refer to 4-12 Line Key Selection for
Telephone Mode on page 2-517 .
13 CO/PBX Busy Forward Station
Assignment Not Specified N/A
14 Intercom Master Hunt Number
Selection NO NO, YS
15 Intercom Master Hunt Number
Forward Assignment No Telephones
Specified Station Number (2~7 digits)
17 Station to Class of Service Feature
Assignment 00 Refer to 4-17 Station to Class of
Service Feature Assignment on page
2-526
.
18 Station Name Assignment Not Specified Up to six digits /characters (R3500 or
lower)
Up to 16 digits /characters (R4000/
R4500 or higher)
19 Trunk Outgoing Restriction LEDs Off Off = Not Restricted
On = Restricted
23 Prime Line/Hot Line Assignment Not Specified Up to 10 digits
24 SLT Hookflash Assignment HOLD HOLD, DISC
26 DISA ID Number Station
Assignment 01 Refer to 4-26 DISA ID Number Station
Assignment on page 2-536 .
28 Multilingual LCD Indication
Selection ENG JAPA, FREN, ENG, SPAN
29 HFU Selection NO NO, YS
30 Hold/Transfer Recall Display
Selection YS YS, NO
31 Receiving Internal/All Call Page
Selection YS YS, NO
LK 4 Telephone Mode (Continued)
Data
No.
Memory Block Name Default Value Programming Values