NEC ElectraElite IPK, Programming Manual

Page: 392 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 315
___________________________________________________________________________________
___________________________________________________________________________________
Notes
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Assignment
1-13-00 PRT Channel Assignment
1-13-01 PRT Signal Format Selection
1-13-02 Clear Channel Selection
1-13-03 Call by Call Service Selection
1-13-04 PRT B Channel Outgoing Priority Selection
3-03 Trunk-to-Trunk Group Assignment
3-91 Trunk Type Selection
1. This Memory Block must be coordinated with Memory Block 3-03 (Trunk-to-Trunk Group Assignment). The
number of assigned channels must be the same or greater (including default) than the number of trunks to a
trunk group assigned In Memory Block 3-03.
For Example, When Memory Block 3-03 has five PRT trunks for Trunk Group 1, this Memory Block must have at
least five B channels for Trunk Group 1.
2. This Memory Block applies only to PRT(1)-U( ) ETU firmware version 4.0 or higher.