NEC ElectraElite IPK, Programming Manual

Page: 136 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 59
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1. Select options from the list of function numbers in Memory Block 1-1-46 [Access Code (1-Digit) Assignment], and
assign a number (from 00~99),
,
, or
#
to each selected function.
H
When a function is assigned a 1-digit Access Code, 2-digit Access Codes with the same first digit become
invalid (i.e., if a function is assigned to Access Code 5, Access Codes 50~59, 5
,
, and 5
#
cannot be used).
2. To enter
#
or
,
as part of an Access Code, press
B
then
L
or
J
.
3. Use this Memory Block when a 4-Digit Station Numbering Plan is programmed.
4. When function 001 (Station Number) is assigned in this memory block, it cannot be assigned in Memory Block
1-1-46 [Access Code (1-Digit) Assignment] or Memory Block 1-1-48 [Access Code (3-Digit) Assignment].