NEC ElectraElite IPK, Programming Manual

Page: 346 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 269
___________________________________________________________________________________
___________________________________________________________________________________
1-10-03 Call by Call Numbering Plan ID
Assignment
General Description
Use this Memory Block to send the Numbering Plan Identification (NPI) for each Route
Advance Block (RAB). This setting data is sent in the NPI field of the CPN-IE (Called
Party Number-Information Element) when making outgoing calls.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK10 +
JC
to access the Memory Block. Default Values
All RABs 00
3 Enter data using the dial pad.
Use the following to enter data:
J
and
L
to move the cursor
K
~
I
to enter data
D
to select next RAB No.
Setting Data:
4 Press
G
to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
E
to go back on-line.
System Mode
1
Submode
10
Data No.
03
PC Programming
¦
+AY
0 1 / 0 3 : N P I = 0 0
T I M E D I S P L A Y
Data
No.
Setting
Data
RAB
01~32
Title
00 Unknown
01 ISDN Number Plan
02 Reserved (Not Used)
03 Data Numbering Plan (Future)
04~08 Not Used
09 Private Numbering Plan
10~15 Not Used