NEC ElectraElite IPK, Programming Manual

Page: 178 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 101
___________________________________________________________________________________
___________________________________________________________________________________
1-1-81 ISDN Dial Interval Time Selection
General Description
Use this Memory Block to specify the time between each digit dialed before digits are
sent over the ISDN PRI line Network. This also applies to K-CCIS outgoing calls.
This Memory Block can be adjusted in 1-second intervals (R3000 or higher).
Display (2500 or lower)
Settings
Refer to the next page for R3000 or higher Programming Procedures.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
default.
2s 4s 8s 16s 32s
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +
HA
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
System Mode
1
Submode
1
Data No.
81
PC Programming
¦
+AN
8 1 : I S D N D I A L 4 s
T I M E D I S P L A Y
Data
No.
Title
Setting
Data