1. Specifications
Express5800/E120e-M User's Guide
117
Chapter 4 Appendix
1.
Specifications
1.1
Server Module
N code
N8100-2103F
N8100-2104F
CPU
Supported CPU
Intel ®Xeon® processor
E5-2407v2 E5-2430v2 E5-2430Lv2
E5-2450v2 E5-2470v2
Clock speed
2.40GHz
2.50GHz 2.40GHz 2.50GHz 2.40GHz
No. of CPUs
Standard / Maximum
1/2
3rd cache
10M
15M
20M
25M
Number of cores (C) /
Number of threads (T)
(1 CPU)
4C/4T 6C/12T
8C/16T
10C/20T
Chipset
Intel® C602 chipset
Memory
Standard/Maximum
Not pre-installed / Unbuffered DIMM: 96GB (12x 8GB), Registered DIMM: 384GB(12x 32GB)
Memory module
DDR3L-1600 Unbuffered DIMM(2/4/8GB), DDR3L-1600 Registered DIMM(16GB),
DDR3L-1066 Registered DIMM(32GB)
Maximum clock speed
1066MHz
1333MHz
1600MHz
Error check, correction
ECC, x4 SDDC
Auxiliary
storage
device
Hard disk
drive
Standard Not
pre-installed
Maximum
2.5-inch HDD: SATA 4TB(4x 1TB), SAS 3.6TB(4x 900GB), 2.5-inch SSD: SAS 1.6TB(4x 400GB)
Hot swap
Supported
Interface level /
RAID level
SATA 3, 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Optical disk drive
External drive (Option) *1
FDD
Option: Flash FDD (1.44MB) *2
Device bay
None
Expansi
on bay
Supported slot
1x PCI EXPRESS 3.0 (x16 lane, x16 socket) (Low profile, 167.6 mm in length)
1x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)
Graphics
Chip / VideoRAM
Embedded on management controller chip
Graphic display / resolution
16,770,000 colors: 640x480, 800x600, 1,024x768, 1,280x1,024
Standard interface
3xUSB 2.0 (2x front, x1 internal), 1x Analog RGB (Mini D-sub15-pin, 1x front),
1x Serial port (RS-232C compliant / D-sub 9-pin, Serial Port A, 1x rear),
2x1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2x rear),
1x Management LAN connector (100BASE-T/10BASE-T supported, RJ45, 1x rear)
Power supply
(Power supply unit must be installed in module enclosure.)
1000W / 1600W, 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug available)
(Maximum: 2)
100 to 120 / 200 to 240 V AC ±10% (when 1000W power supply is used)
or 200 to 240 V AC ±10% (when 1600W power supply is used)
50/60Hz ±3Hz (Power cable: required option)
Redundant power supply
Supported (hot-plug available)
Redundant fan
Supported (hot-plug unavailable)
External dimensions
(width
depth
height)
220.1mm
780.0mm
40.4mm (Projections are excluded)
220.1mm
820.2mm
40.4mm (Projections are included)
Weight (Standard/ Max.)
5kg / 7kg
Power consumption (12 VDC, at
maximum configuration, at standby)
127W 124W 130W 132W 137W
Power consumption (12V DC, at
maximum configuration, at high load)
226W 248W 237W 362W 375W
Power consumption (12V DC, at
maximum configuration, in 40°C
environment)
254W 271W 259W 377W 393W
Temperature/Humidity
Operating: 10 to 40°C / 20 to 80% (when 1000W power supply is used)
10 to 35°C / 20 to 80% (when 1600W power supply is used)
Storage: –10 to 55°C / 20 to 80% (No condensation either when operating or when stored)
Accessories Getting
Started
Installed OS
–
Supported
OSs
Support by NEC
Microsoft Windows Server 2008 Standard (RTM,SP2 or later), Microsoft Windows Server 2008
Enterprise (RTM,SP2 or later),
Microsoft Windows Server 2008 Standard (x64)(RTM,SP2 or later), Microsoft Windows Server
2008 Enterprise (x64)(RTM,SP2 or later),
Microsoft Windows Server 2008 R2 Standard, Microsoft Windows Server 2008 R2 Enterprise,
Microsoft Windows Server 2012 Standard, Microsoft Windows Server 2012 Enterprise,
VMware ESXi 5.0,VMware ESXi 5.1
*1
Prepare at least one external DVD-ROM per system for maintenance and OS reinstallation purposes.
*2
Prepare this if required. For the principal uses of a Flash FDD, refer to the notes on Flash FDD in the Maintenance Guide.
