1. Installing Internal Optional Devices
Express5800/E120e-M User's Guide
72
Chapter 2 Preparations
Take the following procedure to install RAID Controller (N8103-172/173/174).
1. Refer to steps 1 to 6 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. Remove the two screws from PCI bracket of
RAID Controller, and remove the PCI
bracket.
3. Remove the two screws from the bracket of additional PCI riser kit that secures the RAID Controller.
Then, remove the bracket.
4. Mount the RAID Controller to bracket
while pulling up the insulator, and secure
it with two screws that come with
additional PCI riser kit, as shown in the
figure.
Screw
PCI bracket
RAID Controller
Bracket
Screw
Screw
