2. Installation and Connection
Express5800/E120e-M User's Guide
98
Chapter 2 Preparations
(2) Removal
Remove the server from the rack in the following procedure.
Important At least three persons are required to remove the server from rack.
1. Make sure that the server is turned off and then disconnect the power cord or all interface cables from
the server.
2. Remove screws from front left and right sides of server, and take out the server from rack gently and
carefully.
Important Be careful not to get your fingers caught in the rails or lever.
3. Hold the server firmly and remove it from the rack.
Important
•
While more than three persons are supporting the bottom part of the server,
slowly pull out the server.
•
Do not apply load on the server from top when it is being pulled out. Doing so
cause the server to drop.
(3) Removing Rails
Remove rails from the rack in the following procedure.
1. Refer to Chapter 2 (2.1.2 Installing the server to the rack or removing it from the rack – Removal(2)
Removal) to remove the server from the rack.
2. While pressing the lever on rail, push the rail toward inside of the rack, then remove it.
