1. Replacing Internal Modules
Scalable Modular Server DX2000 User’s Guide
93
Chapter 5 Replacing Modules
3.
Open the left and right ejectors outward. Hold the both ejectors with your both hands, and pull it straight
up.
Important When you pull out modules, be sure to remove by orange ejector.
4.
Insert the new server module or 10G LAN module into the slot guide slowly and carefully.
Important
•
Make sure the module is installed in the correct direction.
•
Be sure to hold the server module only at the ejector or cover.
Pay attention not to touch the bottom of the server module (pin section).
Summary of Contents for DX2000
Page 108: ...MEMO...
Page 109: ...MEMO...
