3. Names and Functions of Parts
Scalable Modular Server DX2000 User’s Guide
24
Chapter1 General Description
3.2
Front view
1) POWER
switch/LED
This switch is used to turn
off
the server. (This switch
does not work to turn
on
the server.)
When you press the power switch for eight seconds or
longer, the internal server modules are turned off
(ACPI S5 state).
This does not shut off power supply to the server
modules, so communication with the BMC is still
possible.
(4)
Micro-USB connector for connecting
management PC
Serially connected with each BMC of server
modules, NW switch modules and CSC
nodules implemented on this server.
Connect cable after the server starts.
(5
) USB connector dedicated to slot 1
This is used as USB3.0 interface of server
modules implemented in slot 1.
(2) Unit ID (UID) switch/LED
This switch is used to turn on and off the UID LED.
Pressing the switch once turns on the UID LED and
pressing again turns off the LED.
Commands from software also cause the UID LED to
turn on.
(3) STATUS
LED
This LED indicates the server status.
(3)
(2)
(4)
(1)
(5)
Summary of Contents for DX2000
Page 108: ...MEMO...
Page 109: ...MEMO...
