3. Names and Functions of Parts
Scalable Modular Server DX2000 User’s Guide
35
Chapter1 General Description
On the rear of the unit, each QSFP module connector has a LINK/ACT LED, and each management LAN
connector has a LINK/ACT LED and a SPEED LED.
●
LINK/ACT LEDs (QSFP module ports,
M)
The status of the port pointed by the triangular mark is displayed.
The following table describes each LINK/ACT LED status and
its meaning.
LINK/ACT LED status
Description
On (green)
The server is connected with a network normally.
Flashing (green)
The server is accessing a network.
Off
The server is disconnected from a network.
●
SPEED LED (
M)
These LEDs indicate with which interface protocol the management LAN port (
M) runs.
The management LAN (
M) supports 1000BASE-T, 100BASE-TX, and 10BASE-T.
The following table describes each SPEED LED status and its meaning
SPEED LED status
Description
On (amber)
The ports are running with the 1000BASE-T interface.
On (green)
The ports are running with the 100BASE-TX interface.
Off
The ports are running with the 10BASE-T interface.
LINK/ACT
LED
QSFP module
connector
Management LAN
connectors (
M)
SPEED
LED
LINK/ACT
LED
LAN port number
xe54
xe53
xe52
xe51
Summary of Contents for DX2000
Page 108: ...MEMO...
Page 109: ...MEMO...
