1. Turning on the Server
Scalable Modular Server DX2000 User’s Guide
59
Chatpter 3 Setup
1.2
Checking LEDs
Check LEDs to see if there is any trouble on the server.
Connecting the AC cord starts initializing BMC and CSC modules of server modules and NW switch modules.
The status LED on the front panel light sup in amber until initialization is completed.
Wait for a moment until the status LED stops lighting in amber (it takes about 50 seconds as a rough indication).
At that time, check the Power LED on the power supply unit on the back.
The NW switch module starts booting the built-in OS as soon as it starts initialization. It takes about 90 seconds
to start booting. After completing booting, network connection is enabled.
This server completes preparation for booting.
Status LED
Lighting in amber
↓
OFF
Power status LED
Should light up in green.
Summary of Contents for DX2000
Page 108: ...MEMO...
Page 109: ...MEMO...
