NEC DTERMSP30 Manual Download Page 20

Page: 20 / 119

Volume Adjusting

You can adjust the volume of call sound and sound from
the speaker to 9 stages respectively.

Adjust the volume of call sound while receiving or

waiting for a call.

Adjust the volume of received call while making a

call or sending a message.

You can make only your voice mute so that the other

person cannot hear.

Click

(Mute Button).

[Mute] Button blinks in blue and other person

cannot hear your voice.

When clicking [Mute] Button again, other person
can hear your voice again.

Volume Adjust-

ing

Adjusting

When all the volume blinks in red
or yellow:

Call quality is degraded due to network
congestion and so on. The blinking means

as follows:

• Blinking in red: Quality of call sound is

degraded.

• Blinking in yellow: Quality of received

sound is degraded

When the call quality is recovered, the but-

ton stops blinking.

Making Your Voice

Mute Temporarily

Increase

Decrease

Click

Summary of Contents for DTERMSP30
























































































































Search results

Summary of Contents for DTERMSP30

Reviews:

Related manuals for DTERMSP30

Brands by name

Popular brands

NEC DTERMSP30, Manual

Search results

Summary of Contents for DTERMSP30

Reviews:

Related manuals for DTERMSP30

Brands by name

Popular brands