Installing the Cabinet
1-6
◆
Section 1: Installation Basics
DS1000 Hardware Manual
Removing the Cover
You must remove the Main Equipment Cabinet cover to access the extension, trunk and auxiliary connections.
To remove the cover
(Figure 1-2)
:
1.
Slide the cover button to
OPEN.
2.
Slide the cover away from the Main Equipment Cabinet.
Hanging the Cabinet
To hang the cabinet
(Figure 1-3)
:
1.
Screw suitable fasteners 11 3/16” apart in a convenient location on the MDF. Be sure to leave the fas-
teners “backed out” about 3/16” from the MDF backboard.
2.
Hang the cabinet as shown.
Figure 1-2: Removing the Cover
Figure 1-3: Hanging the Cabinet
80200 - 2-01
Push button
to "OPEN" position
80200 - 3
11 - 3/16"
Summary of Contents for DS1000
Page 6: ...Table of Contents iv Table of Contents DS1000 Hardware Manual...
Page 20: ...The Extension Block 2 4 Section 2 Trunk and Extension Cabling DS1000 Hardware Manual...
Page 42: ...Keyset Self Test 4 18 Section 4 Optional Equipment DS1000 Hardware Manual...
Page 58: ...Parts List 6 8 Section 6 Specifications and Parts DS1000 Hardware Manual...
