NEC A Series User Manual Download Page 39

Page: 39 / 74

Menu

Sub-Menu

Network

Settings

Wireless Network

Settings

Turn on/off Wireless LAN Station mode of the LED
Poster. When the LED Poster is connected via

external router, turn on Wireless LAN Station mode,

click the Wireless LAN name of the external router

and enter the password of the Wireless LAN.

Wired Network

Settings

Turn DHCP on/off.
When the LED Poster is connected via Ethernet

cable, please turn off DHCP and set the static IP

address and other relevant information.

Mobile Data Settings The LED Poster cannot connect to mobile network.

Monitoring

Ambient Brightness

Display ambient brightness. This is only available

when a light sensor is connected to the LED Poster.

Temperature

Display receiving card temperature.

Playback Screenshot

Capture current screen.

System Parameter

Display CPU usage, available storage and external

storage.

Time Parameter

Display the time zone and time of the LED Poster.

Video

Controller

Control video input mode, video source, zoom and

offset position (for T6/TB6 and the later versions of

Taurus only).
Meanings of the values of

Mode



Manual: Switch instantly between the

synchronous mode and asynchronous mode.



Timing: Switch between the synchronous mode

and asynchronous mode as scheduled.



HDMI preferred: HDMI is preferred for playing

videos in synchronous mode.

Zoom

is available for external HDMI input signal.

Meanings of the values of

Zoom



On: Images are scaled and displayed to fit the

screen size automatically.



Off: Pictures are displayed according to the

original size. Prompt: Offset range cannot be

greater than the screen width.

Playback

Management

Read back the solution played on the LED Poster,

play, stop, or delete the solution.



Solutions under

Cloud Solution

are sent to the

LED Poster from VNNOX.



Solutions under

LAN Solution

are sent to the LED

Poster from ViPlex Handy (iOS), ViPlex Handy

(Android) and ViPlex Express.

Remote

Management

VNNOX

Bind asynchronous players of the VNNOX to the LED
Poster. After they are bound together, ViPlex Handy

can download relevant solutions from VNNOX to LED

Poster. Username and password are the same as on

VNNOX.

Screen

Information

Set the screen name and registration address, and
displaying the software version and subprogram

version information.

Summary of Contents for A Series











































































Search results

Summary of Contents for A Series

Reviews:

Related manuals for A Series

Brands by name

Popular brands

NEC A Series, User Manual

Search results

Summary of Contents for A Series

Reviews:

Related manuals for A Series

Brands by name

Popular brands