NEC A Series User Manual Download Page 12

Page: 12 / 74

2.4

Ventilation Requirements

Do not operate the LED Poster in an ambient temperature above 35 °C at 100 – 120 V or 40 °C
at 200 – 230 V.

Keep the distances given below to ensure proper ventilation of the LED Poster and to avoid
overheating.

Table 6: Ventilation Distances for Freestanding and Wall Mounting

Freestanding Mounting (Pedestal Stand)

Wall Mounting

Distance

100 mm

280 mm

30 mm

Heat Dissipation

2.4.1

The LED Poster is provided with a highly efficient LED chip to reach low power consumption, less
heat production and a long working life.

The modules are designed fan-free which ensures a super quiet operation. Therefor there are
holes in the middle of the back cover. To allow the heat dissipation these holes must NOT be
covered at all.

WARNING!

Risk of fire and product damage.
Never block the air ventilation holes. Keep them free at all times.

Summary of Contents for A Series











































































Search results

Summary of Contents for A Series

Reviews:

Related manuals for A Series

Brands by name

Popular brands

NEC A Series, User Manual

Search results

Summary of Contents for A Series

Reviews:

Related manuals for A Series

Brands by name

Popular brands