© NEC Corporation 2019 56
Perform the following operations based on your actual needs:
Step 5)
Operation
Step
Create a rule
a)
Click the
+
button.
Result: A pop-up dialog opens.
b)
Choose
Internal
or
HDMI
.
c)
Set the time and cycle to use the video source.
d)
Click the
Add
button.
Result: The rule is created.
Modify a rule
a)
Select a rule.
b)
Click the
button.
Result: A pop-up dialog opens.
c)
Modify the time and cycle to use the video
source.
d)
Click the
OK
button.
Result: The rule is modified.
Delete a rule
a)
Select one or more rules.
b)
Click the
button.
Result: A pop-up dialog opens.
c)
Click the
Confirm
button.
Result: The rule is deleted.
Clear a rule
a)
Click the
button.
Result: A pop-up dialog opens.
b)
Click the
Confirm
button.
Result: The rule is cleared.
Enable a rule
a)
In the rule list, turn on the
Sure to enable
switch next to a rule.
Configure HDMI
parameter
a)
Choose to enable the full screen size zoom
function or not.
b)
Set the position of the playing window.
Click the
Apply
button to confirm the configuration.
Step 6)
Result: The configuration is saved.
HDMI as Preferred Mode
The HDMI port is preferred for playing the video in the synchronous mode.
Click the
Screen control
menu button.
Step 1)
Click the
Video source
function.
Step 2)
Select the target terminal in the terminal list.
Step 3)
Click the
HDMI preferred
button.
Step 4)
Choose whether to enable Full screen zoom and set the output position. That is the
Step 5)
position of the playback window.
Click the
Apply
button to confirm the configuration.
Step 6)
Result: The configuration is saved.