© NEC Corporation 2019 66
5.3.4.13
Configuring the Network via ViPlex Express
Configuring Wired Network
It is required to set a static IP address for the LED Poster while connecting it via Ethernet cable.
Set the IP address based on your actual needs while connecting the Poster to the Internet via
Ethernet cable.
Click the
Screen control
menu button.
Step 1)
Click the
Network configuration
function.
Step 2)
Select the target terminal in the terminal list.
Step 3)
Result: A pop-up dialog opens.
Perform the following operations in the network configuration area based on your
Step 4)
actual needs:
a)
Select
Enable
next to
Dynamic DHCP
to get the IP address automatically.
b)
Deselect
Enable
next to
Dynamic DHCP
and configure a static IP address.
Click the
Apply
button.
Step 5)
Result: The wired network is configured.
Configuring Wireless LAN AP
The default SSID of terminal Wireless LAN AP is "AP" + the last 8 digits of the SN, and the default
password is
12345678
.
Click the
Screen control
menu button.
Step 1)
Click the
Network configuration
function.
Step 2)
Turn on
AP
in the
Screen AP configuration
area.
Step 3)
Result: A pop-up dialog opens.
Enter the SSID and password of terminal Wireless LAN AP.
Step 4)
Click the
Apply
button.
Step 5)
Result: The Wireless LAN AP is configured.
Configuring Wireless LAN Station Mode
If the external router is connected to the Internet, terminals can access Internet via the external
router after Wireless LAN Station Mode is configured.
Click the
Screen control
menu button.
Step 1)
Click the
Network configuration
function.
Step 2)
Turn on
Wireless LAN
in the
Screen AP configuration
area.
Step 3)
Double-click the Wireless LAN information of the external router.
Step 4)
Result: A pop-up dialog opens.
Enter password and then click the
OK
button.
Step 5)
Click the
Apply
button.
Step 6)
Result: The Wireless LAN AP is configured.
