© NEC Corporation 2019 17
3.2
Freestanding Mounting (on Pedestal Stand)
Prerequisites
Personal
2 or more
Tools
Screwdriver
Equipment
Pedestal stand
Screws
4× M6×30 mm with washers
4× M6×16 mm
see 2.1 Contents, p. 7
How to do it
Assemble the pedestal stand first.
Step 1)
Attach the two mounting brackets to the base plate with the four screws M6×16 mm.
Tighten the screws properly. The tightening torque range is 275 – 314 N·cm.
Step 2)
Attach the pedestal stand to the LED Poster with the four screws M6×30 mm and four
Step 3)
washers.
Tighten the screws properly. The tightening torque range is 275 – 314 N·cm.
Step 4)
Result: The LED Poster is mounted on the pedestal stand.
Caution!
Risk of pinching your fingers.
When installing the pedestal stand, handle the unit with great care.
