NEC 1232 Operation Manual Download

Page: 77 / 86

Other Features

Dial Block

Dial Block can be set or canceled at Attendant extension (No.10 extension). This feature allows the user to
restrict the guests’ outside calls.

- On-hook condition

1. Press key.
2.

Press .

Dial Password.

Press .

Dial the desired extension No. to set Dial Block (e.g. 12)

Press to accept. (1 short beep tone shall be heard.)

Press .

Repeat step 5-7 to set Dial Block to another extension.

                                                                                                  or
                                                                                  Press            to exit.

- On-hook condition

1. Press key.
2.

Press .

Dial Password.

Press .

Dial the desired extension No. to set Dial Block (e.g. 12)

Press to accept. (1 short beep tone shall be heard.)

Press .

Repeat step 5-7 to set Dial Block to another extension.

or
Press to exit.

Wakeup Call

Wakeup call can be set or cancelled from each Single Line Telephone extensions and the Attendant extension
(No.10 extension).

- On-hook Condition

Press key.

Press .

Dial extension No. (e.g. 12)

Press to accept.

Dial Hour and Minute in 24 hours mode.

Press to accept. (1 short beep tone shall be heard.)

Return to the idle condition automatically.

Lift handset.

Dial function code.(954 or 054)

Dial time in terms of 24 hour clock. For example, dial 1545
for 3:45 PM.

Hang up.

OPAC

∗

HOLD

∗

HOLD

∗

HOLD

∗

HOLD

OPAC

(Extension No.10 only)

To set Dial Block at Attendant

extension (No.10 extension):

(Extension No.10 only)

To cancel Dial Block at Attendant

extension (No.10 extension):

OPAC

∗

(Extension No.10 only)

To set Wakeup Call:

Summary of Contents for 1232























































































Search results

Summary of Contents for 1232

Reviews:

Related manuals for 1232

Brands by name

Popular brands

NEC 1232, Operation Manual

Search results

Summary of Contents for 1232

Reviews:

Related manuals for 1232

Brands by name

Popular brands