Hold/Transfer/During Conversation
21
Announced Transfer
Announced Transfer automatically puts the call on System Hold so that the transferring extension can notify
the receiving extension before actually sending the call. To receive an Announced Transfer, receiving
extension just wait on the line to be automatically connected to the transferred caller. Both the transferring
and receiving extensions receive a "fast flash" Hold indication, making the call easy to identify, while all
other KTSs see a "slow flash." If the call is not sent within the Announced Transfer Recall interval, the call
then shows a "slow flash" at the receiving extension, and re-rings the transferring extension.
1. Press key, then dial extension number.
2. Announce the call.
3. Press key or hang up.
1. Flash Hookswitch.
2. Dial extension number.
3. Announce the call.
4. Hang up.
1. Lift handset when notified of the call.
2. Just wait on the line to be automatically connected to the
transferred caller.
1. Lift handset to answer a call.
2. Just wait on the line to be automatically connected to the
transferred caller.
Attendant Reverting
When hold transfer is failed because the destination telephone did not answer and returned back to
originating telephone, then the originating telephone did not answer, the call will be cut off by pre-set timer,
or transferred to Extension No.10 or the attendant extension of each tenant according to system
programming.
Recall Trunk Display
Display type key telephone can be set to the Recall Trunk Display Mode. When Hold Recall tone is heard,
the telephone will display the held Trunk line and the telephone number.
1. Press key.
2. Press key.
3. Press key.
4. Press key.
To make an Announced
Transfer:
To receive an Announced
Transfer:
To set/reset Recall Trunk
Display:
ICM
TRFR
SPK
OPAC
CHECK
ICM
