NEC 1232 Operation Manual Download

Page: 38 / 86

Intercom Outgoing Call

Lift handset.

Press key.

3. Dial , , .
4. Hang up.

1. Lift handset.
2. Dial 059 or 959.

- Do not lift handset-

1. Press key.
2. Press key. (see Note )

Note: The extension must be KTS with LCD.

Lift handset.

Press key.

3. Dial , destination extension number, .
4. Hang up.

- Do not lift handset.

1. Press key.
2. Dial . Extension number is displayed.
3. Press key to clear the Message Waiting Indication.

Or
Press key to call back Message Waiting originating

extension.
Or

To display the next extension number that left a Message

Waiting indication, dial

again.

Press to return to normal display.

To cancel all Message Waiting

indications

you left:

To cancel an individual

Message Waiting from the

originating phone:

To display the extension that

left a Message Waiting:

∗

CHECK

∗

HOLD

ICM

CLEAR

∗

ICM

∗

ICM

OPAC

CLEAR

To cancel all Message Waiting

indications you left and that

were left for you:

Summary of Contents for 1232























































































Search results

Summary of Contents for 1232

Reviews:

Related manuals for 1232

Brands by name

Popular brands

NEC 1232, Operation Manual

Search results

Summary of Contents for 1232

Reviews:

Related manuals for 1232

Brands by name

Popular brands