NEC 1232 Operation Manual Download | Manualshive

Page: 19 / 86

background image

Trunk Outgoing Call

13

Automatic Off-Hook Trunk Access

If Automatic Off-Hook Trunk Access is enabled for your telephone, you can access an idle trunk line without
pressing Line key or dialing Trunk Access Code. This feature is useful for Key Telephone users who make
mainly outside calls, or to connect Fax Machine (Modems).

1. Lift handset or press key.

- An idle Trunk Line will automatically be seized.

Note 1: If all Trunk Lines are busy, no tone will be heard.
Note 2: If you are assigned this feature, you can not seize Intercom after lifting handset.

Press ICM key before

lifting handset to seize Intercom.

Note 3: If you lift handset when the telephone rings, it will answer an incoming Trunk Line or an Intercom call.

1. Lift handset.

- An idle Trunk Line will automatically be seized.

Note 1: If all Trunk Lines are busy, Busy Tone will be heard.
Note 2: If you are assigned this feature, you

can not place Intercom Calls

. However, you can still receive

incoming Intercom Call and transferred Trunk Line Call. Transferring Trunk Line calls to another extension
is also possible.

Account Code

Account Codes are codes you enter that help keep track of outside calls. There are two types of Account
Codes: Optional and Forced. With optional codes, the Account Codes you enter are solely for categorizing
your calls. For example, if you work in an accounting firm that must bill back customers for time on the
phone, Optional Account Codes are for you. Forced Account Codes also let you categorize calls, but you

must

enter one before placing outgoing calls. If you don’t enter the code, you can’t place the call. This

ensures that calls don’t go out untracked. Check with your supplier to find out if your system uses Account
Codes - and which codes you should enter. Account Codes can be from 1-8 digits long, using 0-9 and #.

1. Seize an idle trunk line.

- Listen for dial tone. If you are on an active outside call

already, skip this step.

2 Dial .
3 Dial Account Code.
4. Dial .
5. Dial telephone number.

1. Seize an idle trunk line.

- Listen for dial tone. If you are on an active outside call

already, skip this step.

2. Flash Hookswitch.
3. Dial 99.
4.

Dial Account Code.

5.

Flash Hookswitch.

6.

Dial telephone number.

To seize a trunk line:

SPK

To enter an Account Code for

outside call:

∗

∗

«
...
17
18
19
20
21
...
»

Summary of Contents for 1232























































































Reviews:

No comments

Related manuals for 1232

Brand: NEC Pages: 4

Brand: abc Pages: 8

Brand: KANDA Pages: 176

DECT1560 Series

Brand: Uniden Pages: 64

Passport Conference 2 Series

Brand: Fender Pages: 20

Brand: Uniden Pages: 51

Brand: Jensen Pages: 13

Brand: Nady Systems Pages: 2

RA705/2000 Series

Brand: Racal Acoustics Pages: 11

Touch Tone Capture

Brand: Chase Pages: 10

Prestige Close Coupled Systems

Brand: Rinnai Pages: 48

Brand: Agilent Technologies Pages: 174

Brand: VTech Pages: 16

Brand: Cansec Pages: 32

DS3111-2 - DECT 6.0 Cordless Phone

Brand: VTech Pages: 1

Brand: switel Pages: 144

Brand: Watts Pages: 10

Trac-King In-Motion 9760

Brand: King-Dome Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands