NEC 1232 Operation Manual Download

Page: 76 / 86

Other Features

Room Status

When the DSS Console is in Room Status Mode, Room Status can be Changed at No.10 extension or at all
extensions according to your needs.

1. Lift handset or press .
2. Press key.
3.

Press .

Dial the extension No. to change room status. (e.g. 18)

Dial status No.(0 - 5).

Hang up.

Lift handset.

Press .

Dial the extension No. to change room status.(e.g. 18)

Dial status No.(0 - 5).

Hang up.

Note 1: Status Numbers are as follows:

No.

Indication

Meaning

Check In

Guest is in the room.

Maid Required

Guest left the room and cleaning is required for Maid.

Maid In Room

Guest left the room and Maid is cleaning the room.

Check Out

The room is vacant, and ready for Check In.

Reserve

The room is reserved.

Unavailable

The room is out of order.

Note 2: “Check In” Operation is invalid if the Room Status is “Unavailable”. Change the status to

“Check Out” before “Check In” operation.

SPK

ICM

∗

To Change room status in

Room status mode:

Summary of Contents for 1232























































































Search results

Summary of Contents for 1232

Reviews:

Related manuals for 1232

Brands by name

Popular brands

NEC 1232, Operation Manual

Search results

Summary of Contents for 1232

Reviews:

Related manuals for 1232

Brands by name

Popular brands