Neatech EVO3, Service Manual, Page: 85 / 93

www.neatech.it
85
Motor error
3B00 M1
3C00 M2
This occurs when the control
system detects that a motor
has become disconnected
Check the motors, cables and
connections to the control
system.
If the trip is still present after
the above checks have been
mane, then the Power
Module may be defective.
See section 3.12.
Inhibit active
1E01
1E20
1E21
1E22
1E23
This occurs when any of the
inhibit inputs are active and
in a latched state Reboot the wheelchair. This
will drop out of Latched
Mode and clear the trip
Lamp short
7205 Left lamp short
7209 Right lamp short
This occurs when a short in
either of lamps circuit is
detected.
Check the lamps, cables and
connections.
If the trip is still present after
the above checks have been
made, then the Light Module
may be defective. See
section 3.13.
Indicator lamp short
7206 Left indicator short
720A Right indicator short
This occurs when a short in
either of indicators circuit is
detected.
Check the indicators, cables
and connections.
If the trip is still present after
the above checks have been
made, then the Light Module
may be defective. See
section 3.13.
Indicator lamp failed
7207 Left indicator failed
7208 Right indicator failed
This occurs when a failure in
either of indicators circuit is
detected.
Check the indicators, cables
and connections.
If the trip is still present after
the above checks have been
made, then the Light Module
may be defective. See
section 3.13.