
www.neatech.it
28
2.7.5
Battery charging
To recharge the batteries use only the provided charger or one recommended by Neatech.it.
The manufacturer is not responsible for damage to person or property resulting from the use of
non-original product.
For a list of recommended charger please contact your vendor.
Connect the power cord to a power supply 230 V.
Connect the cable to the joystick as shown in Figure 28 and Figure 29.
Figure 28
Figure 29
When batteries are loaded unplug the power cord and the battery cable.
Battery charging should be done in well ventilated environments. Never charge in
bathroom or wet room.
When the charger is connected it is not possible to drive the wheelchair
Each battery is subject to a normal “self-discharge”, so batteries that are not used for long time
will discharge by itself.
Charging time is influenced by multiple factors such as remaining battery power, battery state
of aging and temperature. However the approximate charging time is about 7-9 hours. If the
charge duration was reduced (about 1 hour), that is a sign of failure: contact the vendor for a
possible replacement of batteries.
Don’t use the wheelchair during the charge.
Summary of Contents for EVO3
