Neatech EVO3, Service Manual, Page: 65 / 93

www.neatech.it
65
3.18 Legrest belt
First assure that the wheelchair is on a level surface and it is at the default position (see section
2.7.2 ).
If the wheelchair has any problem at the seating system for which it is not
possible to reach the default position, please contact the manufacturer
Remove the seat cushion. Seeing Figure 81 remove the caps (1) and (2) and unscrew the 4 screws
of the legrest beam.
Sent the removed legrest to the manufacturer; it will be repaired and sent back to you.
Pack the part that need to be substituted or repaired and contact the
manufacturer to know the address of shipment.
Pay special attention to the packaging in order to avoid any damage during
the transport.
Part number Description
R042-003 Legrest actuator
To mount the new part follow the instruction in reverse order.
Figure 81
1
2