Neatech EVO3, Service Manual, Page: 77 / 93

www.neatech.it
77
The parameter PG6 sets the initial length of the legrest when it is completely closed. It is
in cm and the admissibility range is 30-50 cm.
Figure 85
LIFT
UP: Lift the seat UP. For security reasons, if the seat is tilted forward,
first it straightens the seat.
DOWN: Lift the seat DOWN. It checks if there are any crash danger (into the
chassis or into the floor) for the legrest.
Both UP and DOWN function provide for a calculation in order to consider the different
weight on the front and back side of the seat and to decide the power of the two
actuators that move the seat to make the seat to move in a straight way.
TILT
First it checks the initial inclination of the seat.
If the seat is forward inclined:
UP: Incline forward the seat till the maximum customizable position.
DOWN: Incline downward the seat till the horizontal position.
Chassis Orientation
90 °
Chassis Orientation
0 °
5
2
PG 6